| BMW E30 Specialty Tools - Page 2 |
Oil System Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Super Oil Drain Pan/Storage Container |
| The first time that you change the oil in your BMW, make sure you have everything you need to perform the job. Normal pans and buckets are not nearly large enough. Our Super Oil Drain Pan is HUGE!!! It can hold up to 15 quarts and includes a very tight lid that allows the pan to double as a storage container. Simply empty your oil, then stand it upright, and carry it off to your local recycling center. It really couldn't be any simpler. |
|
PEL-PP801095 | Super Oil Drain Pan [More Info] | $15.00 |  |
| On/Off Oil Spout |
| Here's a handy little tool that will save you from frustrating oil spills. Simply attach the spout to the top of your motor oil container and then turn the spout on or off with a quick twist. Allows you to position the spout before you have oil come streaming out. Simply turn the spout off to store any unused portion of motor oil from the bottle. |
|
PEL-PM803510 | On/Off Oil Spout [More Info] | No Longer Available | |
| Flex-tube Spout |
| This Flex-tube Spout attaches to most containers and allows you to accurately position the mouth of the tube exactly where you want it to be located. Two thread sizes to fit most containers. Screws on to motor oil, antifreeze, windshield washer fluid, and similar plastic containers. Complete with stopper cap and hang tab. |
|
PLE-60-200 | Flex-tube Oil Spout, 9 1/4" length [More Info] | $6.45 | |
New Pig Form-A-Funnel  |
| Straight out of the "Why didn't I think of that?" bin comes the Form-A-Funnel from New Pig. Divert oil around engine parts and right into your drain pan for guaranteed no-mess oil changes! The Form-A-Funnel Draining Tool bends, molds and holds any shape so you can customize the perfect channel to drain liquids without making a mess. The Form-A-Funnel features a thick, pliable nitrile rubber coating that completely encases a thin, bendable layer of aluminum alloy; reshape and reuse thousands of times without fazing it. Highly compatible nitrile rubber ensures safe handling when used with common vehicle liquids and chemicals; works in temperatures from -30°F to 425°F. The Form-A-Funnel cleans easily with a wet rag and is compatible with most cleaners and degreasers. You can even store it flat or roll it up. |
|
PEL-PIG18611 | New Pig Form-A-Funnel, 29" x 5" [More Info] | $34.95 | |
PEL-PIG18714 | New Pig Form-A-Funnel, 22" x 8.6" [More Info] | $34.99 | |
PEL-PIG18609 | New Pig Form-A-Funnel, 14.5" x 6.5" [More Info] | $19.99 | |
PEL-PIG18509 | New Pig Form-A-Funnel, 9" x 4.75" [More Info] | $9.99 | |
Engine Tools |
| Camshaft Holding Tools |
| You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
|
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 | |
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 | |
| Crank Pulley Securing Tools |
| These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
|
TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [More Info] | $69.70 | |
TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [More Info] | $58.80 | |
TOL-3034-3 | Crank Pulley Securing Tool, For BMW M30 Engines, Each [More Info] | $58.80 | |
TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [More Info] | $159.60 | |
