|  | | | BMW E30 Suspension - Page 4 | Turner Motorsport E30 Fixed Camber Plates  | | These "fixed" steel camber plates (Legal for J stock) for your E30 will add 3/4 degree of negative camber and will reduce understeer during hard cornering and save the outside edge of your tire !These plates mount above the upper strut bearing and do not require removal of the bearing to install. |
|  PEL-TSU3080459 | Turner Motorsport Fixed Camber Plates (pair of two), E30 3 Series, ALL (1984-92), Each Brand: TMS [More Info] | Temporarily unavailable | | Reinforcement Plates |  41-14-8-169-027-BOE | Reinforcement Plate (Left), For Upper Rear Shock Mounting Plate Repair, E30 3-Series Coupes and Sedans Brand: Genuine BMW [More Info] | $21.75 |  |  41-14-8-169-028-BOE | Reinforcement Plate (Right), For Upper Rear Shock Mounting Plate Repair, E30 3-Series Coupes and Sedans Brand: Genuine BMW [More Info] | $21.75 |  | | Racing Rear Shock Mounts | | These heavy duty shock mounts replace the stock rubber bushings on the E30 BMW and provide a stiffer, more direct feel for those of you with a racing suspension setup. These kits replace the stock rubber bushing with a billet aluminum housing with urethane bushings. These kits are setup with the stock E36 M3 geometry which adds approx. 10 degrees of negative camber to the rear wheels. This increased negative camber greatly improves road handling. These kits are a direct bolt-in replacement. Note: these kits are intended for racing only. |
|  88-4024-550-M490 | Racing Shock Mount Set, Rear, BMW E30 3 Series, All (1984-92) Brand: JT Design [More Info] |  |
| $100.50 |  | Shock Bump Stops |  31-33-1-124-449-M58 | Foam Bump Stop for Front Shocks, E30 318i/iC, 325/e/es/i/is/iC/iX, Each Brand: OEM [More Info] |  |
| $11.25 |  |  31-33-2-225-377-M58 | Foam Bump Stop for Front Shocks, E30 M3, Each Brand: OEM [More Info] |  |
| $12.00 |  |  33-52-1-125-078-BOE | Bump Stop for Rear Shock, each, E30 3-Series all Brand: Genuine BMW [More Info] | $5.25 |  | Shock Protective Boots |  31-32-1-125-878-M604 | Protection Boot for Strut/Shock (2 per car, sold individually), 325iX (1988-91) Brand: Vaico [More Info] |  |
| $9.75 |  | | Protection Boot for Front Strut/Shock (2 per car, sold individually), BMW E30 Front 318i/iC, 318i M42, 325/e/es, 325i/is, 325iX (through 8/90), M3, Each | | 31-33-1-134-314-BOE | Protection Boot for Front Strut/Shock (2 per car, sold individually), BMW E30 Front 318i/iC, 318i M42, 325/e/es, 325i/is, 325iX (through 8/90), M3, Each Brand: Genuine BMW [More Info] | $3.50 |  |  31-33-1-134-314-M604 | Protection Boot for Front Strut/Shock (2 per car, sold individually), BMW E30 Front 318i/iC, 318i M42, 325/e/es, 325i/is, 325iX (through 8/90), M3, Each Brand: Vaico [More Info] |  |
| $2.50 |  |
|  33-52-1-129-263-M9 | Protection Boot for Rear Shock (2 per car, sold individually), E30 318i/iC, 318i M42, 325/e/es, 325i/is/iC/iX, M3 Brand: Genuine BMW [More Info] |  |
| $28.25 |  | Pelican Parts Bushing, Ball Joint and Control Arm Kits | These kits contain everything you need in order to voerhaul you car's control arms, control arm ball joints and suspension bushings all in one go. NOTE: These kits do not include differential, sway bar or rear subframe mounts. All kits contain the following parts, in addition to those specifically listed in the description:- New Control Arms with Ball Joints
- New Control Arm Bushings
- New Rear Trailing Arm Bushings
|
| | PEL-BABKE30-1 | Bushing, Ball Joint and Control Arm Kit, 318i without air conditioning (through 8/84) [More Info] | $270.75 |  | | PEL-BABKE30-2 | Bushing, Ball Joint and Control Arm Kit, 318i with air conditioning (through 8/84), 318i without air conditioning (9/84-86), 318i/is/iC (1991) [More Info] | $274.25 |  | | PEL-BABKE30-3 | Bushing, Ball Joint and Control Arm Kit, 325/e/es/i/is/iC (1984-91) [More Info] | $269.75 |  | | PEL-BABKE30-4 | Bushing, Ball Joint and Control Arm Kit, 325iX (1987-91) [More Info] | $654.00 |  | | PEL-BABKE30-5 | Bushing, Ball Joint and Control Arm Kit, M3 (1987-8/89) [More Info] | $310.00 |  | | PEL-BABKE30-6 | Bushing, Ball Joint and Control Arm Kit, M3 (9/89-91) [More Info] | $983.00 |  |
| |
|
|
|