| BMW E30 Oil Circulation - Page 5 |
Oil Level Sensors |
| Oil Level Sensor Sealing Rings |
| 12-61-1-277-602-M213 | Seal Ring for Oil Level Sensor, 325/e/es/i/is/iC (1984-91)
Brand: D P H [More Info] |  |
| $2.50 |  |
12-61-1-277-129-M17 | Seal Ring for Oil Level Sensor, 325iX (1987-90), M3 (1987-91)
Brand: Victor Reinz [More Info] | |
| $1.75 | |
M3 Oil Temperature Switch |
| This switch sends impulses to the oil temperature gauge, informing you of your M3's oil temperature. |
|
| Oil Temperature Switches |
12-61-1-309-193-M85 | Oil Temperature Switch, M3 (1987-91)
Brand: Facet [More Info] | |
| $8.75 | |
FilterMag  |
Snap one on today! FilterMAG achieves the next evolution in magnetic lubricant filtration. FilterMag's patented technology can withstand the force of oil flow and retains contaminants of all sizes, even smaller than 2 microns. Is 2 microns small? Normal table salt is 100 microns in size.
Your current oil filter can only trap particles that are 25 microns and larger. Every 2 1/2 seconds, one quart of oil flows through an engine's oil filter. Oil filter manufacturers don't want you to know that abrasive wear accounts for about 90% of failures due to contamination and 70% of all engine wear and sludge is caused by contaminants not trapped and held by your typical automotive oil filter.
The patented design of focusing rare earth magnet energy into an oil filter is very much like a laser focuses light. Depending on the filter size and usage FilterMAG focuses from 110 to over 1000 pounds of magnetic energy to the filter.
What is a rare earth magnet? All metallic elements with an atomic number between 57 and 71 are classified as rare earth. These rare earth magnets can produce more than 4,100 surface gauss in a tube magnet circuit compared to 1,000 and 2,000 gauss for standard Alnico and Ceramic magnet. (Gauss is a unit measuring electromagnetic force.) FilterMag's rare earth magnets are generally 5 to 10 times stronger than other magnetic filtration devices using Ceramic magnets. The newest generation of rare earth magnets consists of neodymium iron boron. (Neodymium is number 60 on the periodic table.)
What makes the FilterMAG system work? The FilterMAG's outer cover or flux band insures direct contact with the filter and by placing the magnet segments directly on the flux band, circuits the magnetism to drastically increases the magnetic energy by redirecting the power back into the oil filter and not back into the surrounding air. The heart of FilterMAG patented design system starts with unique precision ground and arced Neodymium magnets aligned in North and South series to generate the greatest amount of force to trap and hold metal particles out of the oil flow.
Just install the reusable FilterMAG on your new oil filter and consider FilterMAG as life insurance for your vehicle.
Industry tests found that removing particles 15 microns in size reduced abrasive wear by 70%. These tests also confirm that removal of particles down to 2 microns virtually stops the abrasion wear cycle. Isn't it time to make your oil filter really work? |
|
BBFM-SS250 | FilterMAG, 2.50 to 2.75 inch Filter Size, 110lbs pull force. [More Info] | No Longer Available | |
BBFM-SS300 | FilterMAG, 2.90 to 3.40 inch Filter Size, 150lbs pull force. [More Info] | $47.95 | |
BBFM-SS365 | FilterMAG, 3.50 to 3.90 inch Filter Size, 275lbs pull force. [More Info] | $49.95 | |
BBFM-RA365 | FilterMAG, 3.40 to 4.25 inch Filter Size, 525lbs pull force. [More Info] | $143.92 | |
BBFM-RA450 | FilterMAG, 4.25 to 5.50 inch Filter Size, 1,000lbs pull force. [More Info] | $173.00 | |
Motor Oil & Additives |
| Liqui Moly Motor Oil |
| The Lubro Moly / Liqui Moly Synthoil Premium motor oil is a fully synthetic oil that provides maximum lubrication while minimizing friction, even under extreme operating conditions. Or try the Anti-Friction Semi-Synthetic formula for higher mileage engines. |
|
2041-M19 | Liqui Moly Synthoil Premium 5W-40W Motor Oil (Meets BMW Longlife 98 specifications), 5 Liter Container [More Info] | |
| $41.00 | |
2043-M19 | Liqui Moly MOS2 Anti-Friction 10W-40 Semi Synthetic Motor Oil, 5 Liter Container [More Info] | |
| $37.00 | |
| Red Line Synthetic Motor Oil |
| Red Line Synthetic Motor Oils are designed to provide the highest degree of protection and cleanliness for your engine. We use the most stable synthetic components available and formulate our products for wear protection across a wide range of operating conditions. Red Line lubricants contain polyol ester basestocks, the only lubricants which can withstand the tremendous heat of modern jet engines, which makes our motor oil a necessity to properly lubricate a turbocharger or hot- running engine. The synthetic basestocks have a natural multigrade property, which means that large amounts of unstable polymeric thickeners are not required to manufacture our multigrades. Red Line Synthetic Motor oils will provide better protection than a petroleum oil of the next higher viscosity grade at low RPMs and two protects better than two higher viscosity grades at high shear conditions. Most importantly, Red Line Motor Oils can significantly reduce engine wear, which means a longer useful life for your engine. For more information, see the Red Line Website. |
|
PEL-RL10W40 | Redline Synthetic Motor Oil, 10W-40, 1 quart [More Info] | No Longer Available | |
PEL-RL20W50 | Redline Synthetic Motor Oil, 20W-50, 1 quart [More Info] | No Longer Available | |
| Lubro Moly Oil Additives and Cleaners |
| Lubro Moly MotorProtect Engine Treatment. Fully synthetic oil additive. It significantly reduces wear. High pressure wear protection additives form a very thin film on all mating partners in the engine, that is compliant and very slippery under wear conditions. The film lasts up to 50.000 km. This results in the following advantages: Significant wear reduction, Longer engine life, Reduction of fuel consumption and pollutant levels thanks to the anti-friction effect, Superior engine performance, quiet operation. For more information, see the Liqui-Moly Website. |
|
2053-M19 | Lubro Moly Motor Protect Engine Treatment, 500ml bottle [More Info] | |
| $27.50 | |
| Lubro Moly MotorClean Engine Treatment. Scrubs and cleans the engine from inside. The highly effective detergent additives loosen sludge and lacquer deposits and keep solid and liquid contaminants in suspension. At the oil change they are drained out with the used oil. After an oil change thus prepared, the fresh oil develops its full potential: the engine regains its full power. It runs with less wear. The exhaust gas performance is improved. Oil starvation is prevented. |
|
2037-M19 | Lubro Moly Motor Clean Engine Treatment, 500ml bottle [More Info] | |
| $12.25 | |
| Lubro Moly MO2 Motor Oil Friction Treatment. The anti-friction lubricant MoS2 forms a highly load-resistant lubricating film on all rubbing and sliding surfaces. It reduces friction and guarantees easier running of the engine. As a result there are the following advantages: significant reductions in fuel and oil consumption, scientifically proven wear reduction of more than 50%, fewer break-downs, and emergency running properties. Tested for catalytic converters and turbochargers. |
|
2009-M19 | Lubro Moly M02 Motor Oil Friction Treatment, 300ml/can [More Info] | |
| $7.50 | |
| Lubro Moly MO2 Transmission Friction Treatment. An additive specially developed for manual gearboxes, differentials, and steering units with oil bath. It reduces wear significantly and lowers peak operating temperatures: quieter operation, easier shifting, better running in. The gearbox runs quietly and warms up less. Even older gearboxes regain running smoothness and performance thanks to the "repair" of the gear surfaces. Increases operating safety and provides emergency running properties through the MoS2. |
|
2019-M19 | Lubro Moly MO2 Transmission Friction Treatment, 50g [More Info] | |
| $9.75 | |
| Lubro Moly Oil Sludge Remover. Extended oil change intervals, small oil volumes, inadequate fuel quality, lean burning engines with their higher nitrogen oxide levels, tend to cause the formation of sludge in the engine. The sludge clogs oil screens, oil filters and oil passages. The supply is interrupted. Engine damage results. Öl-Schlamm-Spülung cleans the engine. Keeps oil screens and oil passages clean and free. Reduces deposits in the piston ring grooves. Prevents oil starvation and protects against engine damage. |
|
PEL-LM5200 | Lubro Moly Oil Sludge Remover [More Info] | No Longer Available | |
| Lubro Moly Leak Stopper.Puts an end to the environment-polluting oil spots on the streets, driveways and garages. Öl-Verlust-Stop regenerates engine seals and reduces the oil consumption over the piston rings (by maintaining the viscosity) and over the valve guides (by regenerating the seals). Prevents blue exhaust smoke. Compensates for viscosity loss and reduces engine noise. |
|
PEL-LM1005 | Lubro Moly Leak Stopper [More Info] | No Longer Available | |
| Lubro Moly Viscosity Stabilizer.Reduces oil consumption. Keeps the oil viscosity stable. For constant oil pressure. Visco-Stabil offers outstanding protection against the shearing of the motor oil even under the hardest operating conditions. Prevents oil thinning with frequent cold starts. Through better sealing of movable engine parts oil consumption is reduced. Therefore especially recommended for older, high mileage cars. Reduces hydraulic lifter noise. |
|
PEL-LM1017 | Lubro Moly Viscosity Stabilizer [More Info] | No Longer Available | |
