| BMW E30 Cylinder Head & Valvetrain - Page 6 |
Hydraulic Lifters |
| Whenever you replace the camshaft, always replace the lifters as well. As with any moving parts, they wear down, so installing a new camshaft with old lifters can cause premature wear on your camshaft. |
|
| Hydraulic Lifters |
11-32-1-734-341-M40 | Hydraulic Lifter for Intake & Exhaust, 318i/is/iC (1991), As Needed, Each
Brand: INA [More Info] |  |
| $17.75 |  |
Cylinder Head Bolts |
| Rebuilding your engine? Why take risks with old hardware? Use OEM original bolts when reassembling your engine. Head bolts have a tendency to stretch when they are initially torqued, so it's good insurance to use new bolts during re-assembly. Note: BMW recommends owners of 325 6 cylinder models upgrade to the newer Torx style head bolts as the original hex head bolts can stretch and break. |
|
| Cylinder Head Bolts |
11-12-0-621-144-M17 | Head Bolt, 10 required, 318i (1984-85), Each, As Needed
Brand: Victor Reinz [More Info] | |
| $3.00 | |
11-12-1-307-135-M9 | Head Bolt, 10 required, M3 (1987-91), Each
Brand: Genuine BMW [More Info] | |
| $6.75 | |
| 11-12-1-713-264-BOE | Cylinder Head Dowel Pin, 9.5mm (6 per car, sold individually), 318i/is/iC (1991)
Brand: Genuine BMW [More Info] | $9.75 | |
| Cylinder Head Washers |
11-12-7-550-856-M9 | Cylinder Head Washer, For Cylinder Head Bolts, 318i/is/iC (1991) As Needed, Each.
Brand: Genuine BMW [More Info] | |
| $1.50 | |
| Cylinder Head Bolt Sets |
11-12-1-721-939-M17 | Cylinder Head Bolt Set, 318i/is/iC (1991), Each
Brand: Victor Reinz [More Info] | |
| $14.00 | |
11-12-1-726-478-M17 | Cylinder Head Bolt Set, 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Victor Reinz [More Info] | |
| $18.75 | |
Intermediate Shaft Parts |
| Camshaft Seal, Intermediate Shaft Seal, 38 x 50 x 7, E30 325/e/es, 325i/is, 325iC/iX |
11-12-1-285-609-M213 | Camshaft Seal, Intermediate Shaft Seal, 38 x 50 x 7, E30 325/e/es, 325i/is, 325iC/iX
Brand: DPH [More Info] | |
| $5.50 | |
11-12-1-285-609-M104 | Camshaft Seal, Intermediate Shaft Seal, 38 x 50 x 7, E30 325/e/es, 325i/is, 325iC/iX
Brand: Corteco-CFW [More Info] | |
| $8.75 | |
Head Gasket Sets |
11-12-1-734-142-M17 | Head Gasket Set, 318i (1984-85)
Brand: Victor Reinz [More Info] | |
| $56.50 | |
11-12-9-063-333-M17 | Head Gasket Set, 318i/is/iC (1991)
Brand: Victor Reinz [More Info] | |
| $108.50 | |
11-12-9-059-249-M17 | Head Gasket Set (also use two 11-62-1-728-489-M17 exhaust manifold gaskets), E30 325/e/es (through 6/88)
Brand: Victor Reinz [More Info] | |
| $80.00 | |
| Head Gasket Set, 325i/is/iC/iX (1987-91) |
11-12-9-059-240-M17 | Head Gasket Set, 325i/is/iC/iX (1987-91)
Brand: Victor Reinz [More Info] | |
| $78.00 | |
11-12-9-059-240-M30 | Head Gasket Set, 325i/is/iC/iX (1987-91)
Brand: Elring Klinger [More Info] | |
| $77.00 | |
|
11-12-1-316-992-M17 | Head Gasket Set, M3 (1987-91)
Brand: Victor Reinz [More Info] | |
| $206.75 | |
