|  | | | BMW E24 Clutch & Flywheel - Page 4 | Flywheels and Related Parts | | Flywheel Bolts | 
11-22-0-616-143-M9 | Flywheel Bolt, Auto Trans, 12 X 22 mm (8 per car, sold individually), BMW E24 6 Series All, As Needed, Each
Brand: Genuine BMW [More Info] |  |
| $4.50 |  | 
11-22-7-805-885-M9 | Flywheel Bolt, Manual Trans, 12 X 28 mm (8 per car, sold individually), BMW E24 6 Series All, As Needed, Each
Brand: Genuine BMW [More Info] | |
| $4.50 | | | Flywheel Seals | 
11-14-2-249-533-M104 | Flywheel Seal (90 x 110 x 12) New style seal that does NOT have a tension spring, E24 630CSi, 633CSi, 635CSi, M6, Each
Brand: CFY-Freudenberg [More Info] | |
| $23.50 | | | Flywheel Seal (90 x 110 x 12) Original style seal that has a tension spring, E24 630CSi, 633CSi, 635CSi, M6, Each | 
11-14-2-245-364-M30 | Flywheel Seal (90 x 110 x 12) Original style seal that has a tension spring, E24 630CSi, 633CSi, 635CSi, M6, Each
Brand: Elring Klinger [More Info] | |
| $10.00 | | 
11-14-2-245-364-M17 | Flywheel Seal (90 x 110 x 12) Original style seal that has a tension spring, E24 630CSi, 633CSi, 635CSi, M6, Each
Brand: Victor Reinz [More Info] | |
| $9.25 | | Brake Fluid  | | Até is the best brake fluid in the business. The unique blue color allows you to see when you have finished flushing out your entire system of old brake fluid. Plus, it's blue, so it's just plain cooler than ordinary fluid. |
| 
706302-M4 | ATE Super Blue Brake Fluid, 1 Liter
Brand: Ate [More Info] | |
| $15.00 | | Clutch Tools | | You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
| | Torx Female Socket Set | | These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16. |
| 
TOL-LIS26750 | Torx Female Socket Set [More Info] | $20.25 | | | Clutch Wear Gauge | | This tool allows you to check the thickness of the clutch disc without having to remove the transmission (BMW Service Tool# 21 2 060). Information on how to use the tool is located on page 3 of this BMW factory manual. |
| 
PEL-TOL-3004 | Clutch Wear Gauge, Fits M10, M20, M30, S14 S38 Engines ONLY [More Info] | $23.50 | | | Pilot Bearing Puller | | Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
| 
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [More Info] | $52.90 | | | Clutch Disc Alignment Tools | | Needed to properly center the clutch disc when doing a clutch job. |
| 
PEL-TOL-CABW | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 11.9 mm; Spline diameter = 28.5 mm), Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [More Info] | $8.45 | | 
PEL-TOL-T183 | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 14.9 mm; Spline diameter = 28.6 mm), Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only [More Info] | $8.45 | |
| |
|
|
|
