| BMW E24 Axles & Bearings - Page 2 |
CV Joint Grease  |
| Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. Each contains enough grease to effectively one CV joint from completely dry. |
|
| Swepco CV Joint Grease |
SWE-101 | Swepco CV Joint Grease, 14.4 oz [More Info] | $11.29 |  |
| OE Lubromoly CV Joint Grease |
2003-M19 | CV Joint Grease, 100g tube
Brand: Liqui Moly [More Info] |  |
| $6.00 | |
| CV Joint Removal Tool |
Avoid stripping your bolt heads and spending wasted hours cutting and grinding them off by using this special tool to easily remove those pesky CV joint bolts. This tool is for use with 12-point star-shaped bolts only. Please make sure to check your bolts before ordering. It's common for previous owners to replace the 12-point star shaped bolts with more standard allen head bolts instead. Although the 12-point pattern allows you to get a better grip on the bolts (with the correct tool), and apply the high torque that the bolts require, previous owners may have stripped out these bolt heads by attempting to use a torx or hex driver instead of the proper tool. A word of caution here - these other tools MAY work, but if they strip the bolt head, then you are in for an entire afternoon of grinding it off the next time it's replaced.
TIP: Spray the bolts down with WD-40 or Liquid Wrench first to loosen the dirt and debris in the bolt head, then scrape out any dirt that may be left. With the socket on a 6" extension, slip the tool into the bolt head and give it a gentle rap on the end with a mallet to seat it firmly. Following this simple procedure will hopefully avoid you from stripping any CV bolts. |
|
PEL-CV-T1 | CV Joint Bolt Removal Tool - 8mm, 12-point Socket Driver, 3/8 in. drive [More Info] | $34.99 | |
Wheel Bearings & Hub Parts |
| Wheel bearings are one of the parts that routinely wear out on older cars. With the car off the ground, check the wheel for any wobbling or excessive noise. Replace bearings in pairs. Tech Tip: Freeze the rear bearings prior to installation. The cold temperatures will make them shrink slightly and be easier to press in. They also make a nice snack when served with ice cream. |
|
| Front Wheel Bearings |
31-21-1-107-456-M92 | Front Wheel Bearing Kit, Includes Wheel Bearings And Seal (2 per car, sold individually) BMW E24 6 Series (1977-05/78), Each
Brand: SKF [More Info] | |
| $21.75 | |
| 31-21-2-634-106-BOE | Front Wheel Bearing, Inner (2 per car, sold individually) BMW E24 6 Series (1977-05/78), Each
Brand: Genuine BMW [More Info] | $13.00 | |
| 31-21-2-634-103-BOE | Front Wheel Bearing, Outer (2 per car, sold individually) BMW E24 6 Series (1977-05/78), Each
Brand: Genuine BMW [More Info] | $12.75 | |
31-21-1-468-887-M92 | Front Wheel Bearing Kit, Includes Wheel Bearings And Seal (2 per car, sold individually) BMW E24 6 Series (06/78-08/82), Each
Brand: SKF [More Info] | |
| $21.50 | |
| 31-21-1-468-885 | Front Wheel Bearing, Inner (2 per car, sold individually) BMW E24 6 Series (06/78-08/82), Each
Brand: Koyo [More Info] | $7.95 | |
| 31-21-1-468-884-BOE | Front Wheel Bearing, Outer (2 per car, sold individually) BMW E24 6 Series (06/78-08/82), Each
Brand: Genuine BMW [More Info] | $20.50 | |
31-21-1-131-298-M34 | Front Wheel Hub with Bearing (2 per car, sold individually) NOTE: Also use one 31-21-1-128-423-M9 Inner Seal, E28 524td, 528e, 535i/is, M5; E24 633CSi (from 9/82), 635CSi, M6
Brand: FAG [More Info] | |
| $78.25 | |
| Front Wheel Seals |
31-21-2-634-108-M30 | Front Wheel Seal, 45 X 62 X 7 (2 per car, sold individually) BMW E24 6 Series (1977-05/78), Each
Brand: Elring Klinger [More Info] | |
| $3.25 | |
| 31-21-1-119-200-BOE | Front Wheel Seal, 48 X 62 X 7 (2 per car, sold individually) BMW E24 6 Series (06/78-08/82), Each
Brand: Genuine BMW [More Info] | $10.50 | |
| Front Wheel Hub Hardware |
31-21-1-128-336-M36 | Front Wheel Hub Nut, E24 633CSi (from 9/82), 635CSi, Each
Brand: Febi [More Info] | |
| $6.75 | |
31-21-1-128-423-M9 | Front Wheel Inner Dust Shield (2 per car, sold individually), E24 633CSi (from 9/82), 635CSi, M6
Brand: Genuine BMW [More Info] | |
| $4.75 | |
| 07-11-9-934-749-BOE | Front Wheel Bearing Snap Ring, 80 X 2.5 mm, BMW E24 6 Series (9/82-1989), Each
Brand: Genuine BMW [More Info] | $2.75 | |
