|  | | | BMW E24 Cylinder Head & Valvetrain - Page 5 | Exhaust Manifold Gaskets | | These are the various gaskets that seal the BMW exhaust system. Replace them whenever you remove any exhaust components. Keeping your exhaust components sealed is vital to keep your car running correctly. |
| 
11-62-1-723-851-M17 | Exhaust Manifold Gasket (6 per car, sold individually), 633CSi (9/79-08/82), Each
Brand: Victor Reinz [More Info] |  |
| $2.50 |  | 
11-62-1-723-656-M17 | Exhaust Manifold Gasket with Protection Shield (2 per car, sold individually) 633CSi (9/82-84), 635CSi (1985-89), As Needed, Each
Brand: Victor Reinz [More Info] | |
| $11.25 | | 
11-62-1-312-961-M17 | Exhaust Manifold Gasket (6 per car, sold individually), M6 (1987-89), Each
Brand: Victor Reinz [More Info] | |
| $6.50 | | Intake/Exhaust Studs | | Did you happen to break that stud off when you were removing the exhaust manifold? Did it pull out of the head when you were taking the nut off? The good news is that we can provide you with original OEM head studs. We at Pelican recommend replacing any head studs that have come loose or pulled out of the head for extra insurance against leaks and other engine damage. |
| | Intake Port Studs | 
07-11-9-908-368-M9 | Intake Port Stud, BMW E24 6 Series All, As Needed, Each
Brand: Genuine BMW [More Info] | |
| $2.00 | | | Exhaust Studs | 
07-12-9-908-134-M9 | Exhaust Port Stud, 8 X 40 mm, 630CSi (1977), 633CSi (1978-84), 635CSi (1985-89), As Needed, Each
Brand: Genuine BMW [More Info] | |
| $1.00 | | 
11-62-1-711-671-M9 | Exhaust Flange Stud to Header Pipe, 10 X 35 mm, 630CSi (1977), 633CSi (1978-84), 635CSi (1985-89), M6 (1987-89), Each
Brand: Genuine BMW [More Info] | |
| $6.50 | | 
11-62-1-716-884-M9 | Exhaust Flange Stud to Header Pipe, 8 X 95 mm, 635CSi (06/87-89), Each
Brand: Genuine BMW [More Info] | |
| $5.75 | | | 11-62-1-723-725-BOE | Exhaust Flange Stud to Header Pipe, 8 X 87 mm, 635CSi (06/87-89), Each
Brand: Genuine BMW [More Info] | $9.00 | | | Exhaust Manifold Nuts | 
11-62-1-711-954-M58 | Copper Lock Nut, 8mm, For Exhaust Manifold to Cylinder Head, BMW E24 6 Series All (1977-89), As Needed, Each
Brand: OEM [More Info] | |
| $0.75 | | 
18-30-1-737-774-M58 | Copper Lock Nut, 10mm, For Exhaust Manifold To Exhaust Flange, BMW E24 6 Series All (1977-89), As Needed, Each
Brand: OEM [More Info] | |
| $1.00 | | Crankcase Ventilation Hose | 
11-15-1-261-161-M9 | Breather Hose, 630CSi (1977), 633CSi (1978-08/81), Each
Brand: Genuine BMW [More Info] | |
| $7.50 | | 
11-15-1-276-485-M101 | Breather Hose, 633CSi (1978-84), 635CSi (1985-89), Each
Brand: Elaplast [More Info] | |
| $5.00 | | 
13-41-1-710-793-M101 | Breather Hose from Idle Control Valve, 635CSi (1985-89), Each
Brand: Elaplast [More Info] | |
| $7.75 | | 
11-15-1-306-958-M9 | Breather Hose from Valve Cover to Air Accumulator, M6 (1987-89), Each
Brand: Elaplast [More Info] | |
| $20.00 | |
| |
|
|
|
