| BMW E21 Clutch & Flywheel - Page 1 |
| This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time, replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, have it re-surfaced so your new clutch seats correctly. |
|
Clutch Super Kit  |
Now available from Pelican is our clutch super kit for the E21 BMW. In this kit, you get everything you need to replace your clutch all at once. If you are spending the time and effort to pull your engine out of your car, you might as well make sure that you are replacing and fixing every piece that might need attention, while you have access to it. Here's what the kit includes:- Three piece Sachs clutch kit
- New bolts for flywheel and clutch pressure plate
- New crankshaft rear seal (aka flywheel seal)
- New transmission Input Shaft seal
- New pilot bearing and seals
- New release bearing spring clip
- New clutch pivot pin
- New slave cylinder
- New exhaust gaskets
- New slave cylinder hose
If you don't already own one, you will also need the flywheel pilot bearing puller tool for removing the flywheel pilot bearing. You will also need the clutch alignment tool if you don't already own one.
NOTE: Flywheels are not included with these kits. If your old flywheel is worn beyond its re-surfacing limit, it should be replaced with a new one available below. |
|
| PEL-SKCKE21-01N | Clutch Super Kit, 320i/is (9/77-09/79) [More Info] | $350.50 |  |
| PEL-SKCKE21-02N | Clutch Super Kit, 320i/is (9/79-83) [More Info] | $352.00 | |
Clutch Package - 3 Piece Kit |
| Our 3-piece package includes all original equipment Sachs clutch components. Contains New Pressure Plate, New Clutch Disc and a new Throw-out bearing. Save money over the costs of the individual pieces by purchasing the kit in this convenient three-piece package. |
|
21-21-1-223-572-M38 | Clutch Kit, 320i/is (1976-83), Each
Brand: Sachs [More Info] |  |
| $191.75 | |
Pressure Plates |
| Original Equipment Manufacturer for BMW, these Sachs pressure plates are the industry standard for replacement of your BMW's clutch. The pressure plate is what holds the clutch disc against the flywheel and transfers power from the engine to the transmission. If the pressure plate is old or failing, the clamping force may not be enough to transfer all of the power from the flywheel to the transmission without having the clutch 'slip.' A worn out clutch disc may also contribute to the slipping of the clutch. For more information on the design and operation of Pressure Plates, see the Sachs Info Sheet on Pressure Plates. |
|
| Pressure Plates |
3082-061-232-M38 | Pressure Plate, 320i/is (1976-83), Each
Brand: Sachs [More Info] | |
| $84.75 | |
| Pressure Plate Bolts |
07-11-9-913-612-M9 | Pressure Plate Bolt, M8x16mm (8 per car, sold individually), 320i/is (1976-83), Each
Brand: Genuine BMW [More Info] | |
| $2.25 | |
Clutch Discs |
| These Sachs clutch discs are OEM replacements for the original ones shipped with your BMW. |
|
| Clutch Discs |
1861-508-233-M38 | Clutch Disc, 320i/is (1976-83), Each
Brand: Sachs [More Info] | |
| $88.75 | |
| Clutch Alignment Tools |
PEL-TOL-CABW | Clutch Alignment Tool (Spline count = 10; Pilot diameter = 11.9 mm; Spline diameter = 28.5 mm), Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [More Info] | $8.45 | |
PEL-TOL-T183 | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 14.9 mm; Spline diameter = 28.6 mm), Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only [More Info] | $8.45 | |
Throw Out Bearings |
| You should always throw out your old throw-out bearing every time that you replace your clutch disc and pressure plate. A loud squeak when the clutch pedal is pressed in can indicate that there is a problem with your throw-out bearing. This can also indicated a flywheel pilot bearing problem as well. |
|
21-51-7-521-471-M38 | Throw Out Bearing, 320i/is (1976-83), Each
Brand: Sachs [More Info] | |
| $40.50 | |
