| BMW Z8 - Cylinder Head & Valvetrain - Page 1 |
| The cylinder head and valvetrain is a magnificent assembly that combines precisely engineered mechanisms with intricately designed aerodynamics. If, for some reason, a valve spring breaks, the head gasket fails, or a timing belt has snapped, major damage would be inflicted onto the entire motor. When rebuilding the top end assembly of a motor, not only do you need brand new quality parts to get the job done right, but also a reputable machinist to do the work that you can't in your own garage. Be sure to be patient when working on the valvetrain and take all the time you need to build it to your desired specifications. |
|
Engine Valve Cover Gasket Set |
| This gasket is used to seal the valve cover to the cylinder head. |
|
11-12-0-001-269-M30 | Valve Cover Gasket Set Right for Cylinders 1-4 NOTE: Also use- 11 12 1 437 395 valve cover nut seals, Z8
Brand: Elring Klinger [More Info] |  |
| $31.00 |  |
11-12-0-001-278-M30 | Valve Cover Gasket Set Left for Cylinders 5-8 NOTE: Also use- 11 12 1 437 395 valve cover nut seals, Z8
Brand: Elring Klinger [More Info] | |
| $30.50 | |
Cap Nut |
| Valve Cover Nut |
| Used to secure the valve cover to the cylinder head. |
|
11-12-1-401-517-M9 | Cap Nut (Chrome) for Valve Cover & Intake Cover, Z8 (15 Per Car)
Brand: Genuine BMW [More Info] | |
| $9.50 | |
11-12-1-747-162-M9 | Valve Cover Cap Nut Includes Seal, Z8 (20 Per Car)
Brand: Genuine BMW [More Info] | |
| $5.25 | |
| Valve Cover Bolt Grommet |
|
| Valve Cover Nut Seal, Z8 (20 Per Car) |
| 11-12-1-437-395-M61 | Valve Cover Nut Seal, Z8 (20 Per Car)
Brand: Meistersatz [More Info] | |
| $0.75 | |
11-12-1-437-395-M30 | Valve Cover Nut Seal, Z8 (20 Per Car)
Brand: Elring Klinger [More Info] | |
| $0.75 | |
11-12-1-437-395-M17 | Valve Cover Nut Seal, Z8 (20 Per Car)
Brand: Victor Reinz [More Info] | |
| $1.00 | |
|
11-12-1-721-879-M17 | Valve Cover Bolt Grommet, Z8 (6 Per Car)
Brand: Victor Reinz [More Info] | |
| $0.75 | |
Head Gasket |
| The Cylinder Head gasket is used to seal the cylinder head to the engine block and is also used to keep coolant from leaking into the cylinder. It's recommended that you have your head re-surfaced when you use a new head gasket to ensure proper sealing. |
|
11-12-7-833-733-M30 | Head Gasket Right Side Cylinders 1-4 (1.74 mm), Z8
Brand: Elring Klinger [More Info] | |
| $68.00 | |
11-12-7-833-734-M30 | Head Gasket Left Side Cylinders 5-8 (1.74 mm), Z8
Brand: Elring Klinger [More Info] | |
| $69.25 | |
Cylinder Head Bolt Set |
| Cylinder Head Washer |
| These washers are used with the cylinder head bolts. Always use new washers and bolts when re-installing the cylinder head to prevent broken bolts or incorrect torque settings. |
|
11-12-7-550-856-M9 | Cylinder Head Washer for Cylinder Head Bolts, Z8 (20 Per Car)
Brand: Genuine BMW [More Info] | |
| $1.50 | |
