| BMW Z3 Coupe 2.8 - Axles & Bearings - Page 1 |
| The axle shaft assembly is the direct mechanical link that transfers power from the transaxle to the rear wheels. They are designed to allow the axle to continue transmitting power from the differential to the wheels when moving up and down by means of a flexible link called a constant velocity or CV joint. Over time, the bearings in these joints wear, causing the axle to eventually fail. A faulty bearing can make a grinding or clicking noise, may cause the vehicle to shake while driving, or even prevent the axle from turning at all. |
|
Axle Boot Kit |
| This kit contains the components you need to replace the C.V. boots on your car. If you have cracks or rips in your C.V. boots, it's recommended they be replaced as soon as possible to prevent the C.V. joint from locking up due to lack of lubrication. |
|
33-21-9-067-815-M84 | Axle Boot Kit for Rear Axle Outer C/V Joint (2 Per Car), Z3 Coupe 2.8
Brand: Empi [More Info] |  |
| $7.75 |  |
33-21-9-067-818-M60 | Axle Boot Kit for Rear Axle Inner C/V Joint (2 Per Car), Z3 Coupe 2.8
Brand: GKN Loebro [More Info] | |
| $19.75 | |
Lock Plate |
| Axle Nut Retainer |
33-41-1-124-945-M9 | Lock Plate for Rear Axel Nut, Z3 Coupe 2.8
Brand: Genuine BMW [More Info] | |
| $4.75 | |
Drive Shaft Flex Disc |
| The flex disc is the connecting piece between the torque converter and the engine. |
|
26-11-1-227-410-M57 | Flex Disc for Driveshaft, Z3 Coupe 2.8 Auto Transmission
Brand: OEM [More Info] | |
| $47.50 | |
26-11-7-511-454-M57 | Flex Disc Output Flange to Driveshaft 96 mm Diameter 12 mm Bolt Holes, Z3 2.8 Coupe Manual Transmission
Brand: OEM [More Info] | |
| $47.25 | |
Driveshaft Center Support |
| The driveshaft support is used to hold and support the driveshaft from the transmission to the differential. |
|
| Center Support with Bearing Assembly for Driveshaft, Z3 2.8 Coupe |
26-12-1-229-089-M737 | Center Support with Bearing Assembly for Driveshaft, Z3 2.8 Coupe
Brand: [More Info] | |
| $26.50 | |
26-12-1-229-089-M253 | Center Support with Bearing Assembly for Driveshaft, Z3 2.8 Coupe
Brand: APA [More Info] | |
| $20.50 | |
Driveshaft Clamping Ring |
26-11-7-514-037-M36 | Clamping Ring with Threaded Ring for Drive Shaft, Z3 Coupe 2.8
Brand: Febi [More Info] | |
| $9.50 | |
Driveshaft End Bushing |
| Bushing used to center the driveshaft inside the driveshaft support assembly. |
|
26-11-7-526-611-M104 | Guide Bushing for Drive Shaft (Centering Sleeve), Z3 Coupe 2.8
Brand: Corteco_CFW [More Info] | |
| $10.00 | |
Differential Drain Plug |
33-11-7-525-064-M9 | Differential Drain Plug with O-Ring (22 X 1.5 mm), Z3 2.8 Coupe
Brand: Genuine BMW [More Info] | |
| $7.75 | |
Differential Cover Gasket |
| The differential cover seal is used to keep gear oil from leaking out of the differential. |
|
33-11-1-210-405-M9 | Gasket for Differential Cover, Z3 Coupe 2.8
Brand: Genuine BMW [More Info] | |
| $4.75 | |
