| BMW Z3 1.9 - Brake Pads & Rotors - Page 2 |
Retaining Clip |
| Brake Pad Retaining Clip |
| This kit contains the needed hardware to replace the brake pad retainers. |
|
34-11-1-160-348-M4 | Retaining Clip for Front Brake Pads (2 Per Car), Z3 1.9
Brand: Ate [More Info] |  |
| $8.00 |  |
34-21-1-157-046-M4 | Retaining Clip for Rear Brake Pads (2 Per Car), Z3 1.9
Brand: Ate [More Info] | |
| $4.00 | |
Brake Assembly Lubricant |
| Brake Pad Silencer Paste |
| This paste is used to stop brake squeal, which occurs when brake pads vibrate back and forth inside the brake caliper. This paste is used to insulate the pad, therefore controlling the vibration. |
|
83-23-0-305-690-M4 | Brake Assembly Lubricant "Plastilube" For squeaky brakes. (75 ml Tube) NOTE: Also Used for Seat Rails, Chains, Battery Terminals, Sliding Roof Guides, Hinges and Gears., Z3 1.9
Brand: Ate [More Info] | |
| $10.25 | |
Brake Disc |
| Brake discs are one of the standard wear parts on your car. As the brake pads rub against the discs, they eventually wear them thin. When replacing your pads, you should always check the thickness of your discs to see if they need replacement. If you co |
|
| Brake Disc Front 286 X 12 mm, Z3 1.9 |
| 34-11-6-757-750-M904 | Brake Disc Front 286 X 12 mm, Z3 1.9
Brand: [More Info] | |
| $35.75 | |
| 34-11-6-757-750-M805 | Brake Disc Front 286 X 12 mm, Z3 1.9
Brand: [More Info] | |
| $39.75 | |
| Brake Disc Rotor Set Screw |
| This screw is used to hold the brake disc onto the wheel hub. It's a good idea to replace these screws whenever you replace brake discs. |
|
34-21-1-161-806-M9 | Allen Head Bolt for Brake Disc to Hub 8 X 15 mm, Z3 1.9 Front/Rear(4 Per Car)
Brand: Genuine BMW [More Info] | |
| $2.25 | |
Parking Brake Shoe |
| These shoes fit on the inside of the rear brake discs and expand outward when you engage the parking brake, causing them to lock the disc, preventing the car from rolling when parked. |
|
34-41-6-761-289-M73 | Brake Shoe Set for Parking Brake, Z3 1.9
Brand: Pagid [More Info] | |
| $31.00 | |
Anti-Squeal Products |
Anti-Squeal Pad Inserts
Brake squeal got you down? Try these inserts between your pad and your caliper. The pad inserts should help to dampen the brake pads when you begin to brake, thus reducing vibrations that cause squealing.
Wurth Anti-Squeal Products
Copper Paste is a 98% pure copper metallic Anti-Squeal/Seize lubricant sealant compound for all threaded parts and gaskets. CU 1100 is a high temperature stable lubricant up to 2000°F. Non-gumming. Seals out moisture. Will not run out of threads when heated. Sticks to metal threads and lets joints in pipes, nuts on bolts, or studs join with less torque. D.O.T. Non-Hazardous. Comes in 1 lb. can with built-in brush.
Wurth Anti Squeal Spray
Anti Squeal Spray eliminates disc brake squeal. Dries in minutes with permanent effect. Brake Pads must be removed to apply. Contents: 300 ml. |
|
BR-AS-004 | Anti-Squeal Pad Inserts, Set of four [More Info] | Temporarily Unavailable | |
| BR-AS-008 | Anti-Squeal Pad Inserts, Set of eight [More Info] | No Longer Available | |
WRTH-8938132 | Wurth CU 1100 Copper Paste, 1 lb [More Info] | No Longer Available | |
WRTH-890106 | Wurth Anti Squeal Spray, 300 ml [More Info] | $15.75 | |
