| BMW X5 4.8is - Fuel Injection - Page 2 |
Vacuum Hose |
| Colored Silicone Vacuum Hoses |
| These OEM silicone vacuum hoses are colored for easy identification. |
|
| 11-72-7-545-323-M152 | Silicone Vacuum Hose, black, 3.5mm ID, 7.5mm OD, (quantity as needed, priced per meter)
Brand: Rehau [More Info] | No Longer Available | |
| 51-73-1-470-036-M152 | Silicone Vacuum Hose, white, 3.5mm ID, 7.5mm OD, (quantity as needed, priced per meter)
Brand: Rehau [More Info] | No Longer Available | |
| 51-73-1-470-037-M152 | Silicone Vacuum Hose, red, 3.5mm ID, 7.5mm OD, (quantity as needed, priced per meter)
Brand: Rehau [More Info] | No Longer Available | |
| 51-73-1-470-038-M152 | Silicone Vacuum Hose, blue, 3.5mm ID, 7.5mm OD, (quantity as needed, priced per meter)
Brand: Rehau [More Info] | No Longer Available | |
Accessories & Performance |
| Swepco 503 Fuel Improver |
| Restore lost power and clean your Fuel Injection or Carburetors. Removes impurities and particle build up. Drive your engine clean! |
|
SWE-503 | Swepco 503 Fuel Improver, 8oz [More Info] | $7.06 |  |
| Air/Fuel Ratio Monitors |
The K&N Air/Fuel Monitor is designed to help the performance enthusiast calibrate and fine tune the air/fuel mixture ratio. It is an invaluable diagnostic tool that has a place in everyone's tool box, or you can install it in your car to give you real-time readings. This kit continually monitors an engine's air/fuel ratio while the engine is running. It is extremely sensitive to air/fuel ratio changes and will show them instantly and accurately, within the range of the oxygen sensor.
The instrument works whether the engine is carbureted or fuel injected, normally aspirated, turbocharged, or supercharged, and at any load condition. This precision instrument also works with nitrous oxide, but will not work with diesel or nitromethane fuels. This kit comes complete with an oxygen sensor that must be installed into the exhaust system by welding. If your 911 is already equipped with an oxygen sensor (1980-89), an air/fuel monitor may be purchased separately and wired into the existing electrical system. An oxygen sensor is also available separately.
Vehicles with dual exhaust systems (like the 911) can utilize an oxygen sensor in each headpipe or collector that is controlled by a switch that will allow each sensor or bank of cylinders to be read independently. This can show if there is a fuel distribution problem within the intake system, or help to pinpoint a potential problem in advance. |
|
PEL-SW85-2437 | Rectangle Surface mount Air/Fuel Ratio Monitor Kit, w/oxygen sensor [More Info] | $199.55 | |
PEL-SW85-2441 | Round In Dash mount Air/Fuel Ratio Monitor Kit, w/oxygen sensor [More Info] | $206.30 | |
PEL-SW85-2439 | Rectangle Surface mount Air/Fuel Ratio Monitor Kit, without oxygen sensor [More Info] | $137.27 | |
PEL-SW85-2442 | Round In Dash mount Air/Fuel Ratio Monitor Kit, without oxygen sensor [More Info] | No Longer Available | |
PEL-SW85-2438 | Replacement Oxygen Sensor [More Info] | $82.00 | |
PEL-SW85-2440 | O2 Sensor Plug and Fitting [More Info] | $23.60 | |
| PEL-SW85-21688 | Weld on Fitting [More Info] | $10.50 | |
PEL-SW85-21686 | O2 Sensor Plug [More Info] | $16.15 | |
Tools |
| You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Bosch CIS Tester |
| Use the same equipment that the factory techs use to dial in the fuel injection system. Comes complete with all the fittings, schematics and detailed instructions. For Bosch K-Jetronic CIS Systems only. |
|
PEL-PP910450 | Bosch CIS Tester [More Info] | $229.00 | |
