Porsche 914 Technical Information
Ignition Timing
| Ignition Timing 1. Check dwell angle, correcting to 44-50° if necessary. 2. Let engine run until warm. 3. Adjust ignition timing. The adjustment is made with a stroboscopic timing light with the engine oil temperature between 30-70° C / 86-158° F. The ignition timing notch must align with the reference point on the fan housing. |
| Engine | Ignition Timing | At rpm | Vacuum Hoses |
| 1.7 and 2.0 L | 27° btdc | 3500 | Disconnected |
| 1.8 L | 7.5° btdc | 800-900 | Disconnected |
 |
Find out about ordering new & reconditioned parts listed here... | |
| Select here to find out about ordering information, shipping options, and our money-back guarantee on all parts. |
||
 |
Email us with your comments & questions... | |
| Let us know if you have a question about the tech articles, or send us one if you have an experience to share. |
||
 |
Return back to the 914 Forum.. | |
 |
Return back to our home page. | |
This site was designed and produced solely by Pelican Parts.
