Pete Klager
FRONT TRUNK LAYOUT
From To ID Length Notes
---- -- -- ------ ----
Expansion Tank Plastic Vent Line 5 mm 4 inches
Tank (Rear Line) Fuel Filter inlet 7 mm 22 inches 1
Fuel Pump outlet Firewall 7 mm 24 inches 2
Firewall Tank (Front Line) 7 mm 16 inches 1
Fuel Filter outlet Fuel Pump inlet 12 mm 17 inches 1,3
FUEL HOSE LAYOUT
From To ID Length Notes
---- -- -- ------ ----
Fuel Supply Line Right side fuel rail 7 mm 14.5 inches 2
Right side fuel rail Cold Start Valve 7 mm 14.5 inches 2
cold Start Valve Left side fuel rail 7 mm 19 inches 2
Left side fuel rail Fuel Pressure Regulator 7 mm 5 inches 2
Fuel Pressure Regulator Fuel Return Line 7 mm 36 inches 1
fuel rail injector 7 mm 2.5 inches 2
(4 required)
VACUUM HOSE LAYOUT
From To ID Length Notes
---- -- -- ------ ----
Throttle Body (rear) Plastic Tee (rear) 4 mm 11 inches
Plastic Tee (front) Dist. Vac. Adv. (left) 4 mm 10 inches
Plastic Tee (right) EGR Valve 4 mm 7 inches
Throttle Body (front) Dist. Vac. Adv. (right) 5 mm 22 inches
Intake Air Distributor Plastic Tee 5 mm 13 inches
Plastic Tee (left) Fuel Pressure Regulator 5 mm 24 inches
Plastic Tee (right) Decel Valve 5 mm 15 inches
Charcol Canister Plastic Vent Line 5 mm 3.5 inches
Charcol Canister (rear) Fan shroud (right) 12 mm 17 inches 4
Charcol Canister (frnt) Air Cleaner 12 mm 39 inches 4
Intake Boot "Y" Aux. Air Regulator 12 mm 13.5 inches 4
Aux. Air Regulator Intake Air Distributor 12 mm 3 inches 4
Decel Valve (center) Intake Air Distributor 14 mm 19 inches
Decel Valve (side port) Intake Boot "Y" 18 mm 26 inches
Oil Filler EGR/Oil Metal Line 21 mm 4.5 inches
Totals:
-------
4 mm ID Vacuum Hose 28 inches
5 mm ID Vacuum Hose 81.5 inches
7 mm ID Fuel Hose 74 inches
7 mm ID High Pressure 87 inches
Fuel Hose
12 mm ID Fuel Hose 17 inches
12 mm ID Vacuum Hose 72.5 inches
14 mm ID Vacuum Hose 19 inches
18 mm ID Vacuum Hose 26 inches
21 mm ID Vacuum Hose 4.5 inches
Notes:
------
1 high pressure hose can be used
2 must use high pressure fuel hose
3 7/16 inch (11.1 mm) fuel hose can be substituted
4 1/2 inch (12.7 mm) heater hose can be substituted
 |
Find out about ordering parts used in these tech articles... | |
| Select here to find out about ordering information, shipping options, and our money-back guarantee on all parts. |
||
 |
Email us with your comments & questions... | |
| Let us know if you have a question about the tech articles, or send us one if you have an experience to share. |
||
 |
Return back to the 914 Forum... | |
 |
Return back to our home page. | |
This site was designed and produced solely by Pelican Parts.
